ILIFT BEAM CLAMP HOW TO
ILIFT BEAM CLAMP FULL

While not the most popular type of clamp, the scissor beam clamp is still one of the basic types of clamp, and is ideal for lifting applications. There are three different types of beam clamps:

ILIFT BEAM CLAMP HOW TO

Today, we spoke with rigging experts from Brampton, Ontario to learn more about the three main types of beam clamps-they spoke with us about safe tips for use and how to inspect your beam clamp before application. Regularly inspect the beam clamp, in the event of the following defects refer the clamp to a Competent Person for thorough examination: wear, damage or distortion, cracks, insecure bolts etc, corrosion, illegible markings.Beam clamp applications provide support and better load control. Care must be taken to ensure no one clamp takes more than its SWL.īeam clamps should be cleaned and any moving parts lubricated at appropriate intervals unless the suppliers specific instructions indicate otherwise. If two clamps are to be used in tandem the use of ancillary equipment may also be necessary, eg spreader beam. The clamp must be positioned directly over the centre of gravity of the load and the load must not be allowed to swing or impose an oblique loading. It must not cause localised overloading.Įnsure the lifting appliance is compatible with the clamp and that hooks or other attachments fit freely into the eye, shackle etc of the clamp. If any doubt exists consult a Competent Person to confirm suitability.Įnsure the clamp is suitable for the application, correct size and profile for the beam and seats correctly.

ILIFT BEAM CLAMP FULL

The safe use of beam clamps will largely be governed by the requirements for the lifting appliance with which it is to be used but should take the following matters into account:ĭo not use defective beam clamps, lifting appliances or accessories.Įnsure the structure from which the clamp is to be suspended is undamaged and is adequate for the full load that will be imposed. Where necessary fasteners should be reassembled immediately after removal from the beam.īeam clamps should not be dropped or thrown down. They should be dry, clean and protected from corrosion. Never return damaged beam clamps to storage. The supplier should be consulted for such applications which are excluded from these instructions. Some designs are suitable for attachment to the load to provide a lifting point. NOTE: Beam clamps are generally intended for attachment to overhead beams to act as suspension points for liftingĪppliances. If application is temporary or permanent. Type of clamp - adjustable/non-adjustable - scissor, screw or bolt action.Ĭapacity and beam size or range of beam sizes. Select the beam clamp to be used and plan the lift taking the following into account: They may be adjustable or of fixed size, have scissor action, screw locking or bolt clamp fixing and be suitable for temporary or permanent applications. Obliquely load beam clamps without the authority of the supplier.īeam clamps are available in a range of capacities and designs.Force or wedge hooks of lifting appliances into the attachment eye or fitting (eg shackle).Use beam clamps on damaged or distorted beams.Never replace bolts, shackles etc without consulting the supplier.Use beam clamps which are unidentified or uncertified for lifting applications.

Check that the clamp is directly over the centre of gravity of the load.Ensure the beam clamp is strong enough for the full load that will be imposed.Check the clamp is of the correct profile and size, or correctly adjusted, for the beam width and that it seats correctly on the beam flange.Ensure the supporting structure is adequate for the full load that will be imposed and suitable for the application.Inspect beam clamps and accessories before use and before placing into storage.Store and handle beam clamps correctly.Complies with the Machinery Directive 2006/42/EC.īeam clamp, girder clamp, beam girder clamp, adjustable beam clamp, beam clamp for lifting, beam clamp for rigging.Provide super quick adjustment to most I-beams and H-beams.Designed to accommodate a wide range of beam width.Firm anchor point for lifting and pulling.H-Lift Beam Clamp,Girder Clamp BC type features:

Ilift beam clamp